Looking for the best fly tying vises? Trying to find the coolest, highest-quality fly tying vises? Or maybe you’re new to fly tying vises and want to make sure you get started on the right foot with some amazing gear? Either way, you’re in the right place!
- Improved Strong Durable Jaws
- Smooth Rotary Bearing System With Fully Adjustable Tension
- Easy-to-Use Rotary Handle Gives You More Control
- Fully Adjustable For A Wide Range Of Hook Sizes
- Premium Pedastal Base Included with Sure-Lock stem
- New riser! We heard from our customers that they were experiencing a wobble due to the riser hole being a bit too big so we tightened up the tolerances and made the riser taller while we were at it.
- True rotary fly tying vise with two ball bearing housing, extreme smooth and balanced.
- Hardened tool steel jaws fitting 26 to 4/0 hook sizes.
- Arms, bearing housing, handle, shaft and plate are made of hard anodized marine grade Aluminum.
- The brand Kingfisher Fly Fishing is owned by The Kingfisher Fly Shop, based in Missoula, Montana.
- Standard Fly Tying Tool Kit
- Vise and Tools included
- Fly Tying Book included
- Nice Wooden Case
- Super AA Fly Tying Vise
- All purpose Vise
- Full 360 rotation
- Easy to operate
- Great Vise for all levels of Fly Tying
- TRUE 360° ROTATION - The Blackfoot fly tying vise rotates 360° around a single axis point. Adjustability Knobs allow you to change the tension of the rotation. From rock solid to near frictionless. Crank Handle allows for a firm grip when using the fly tying vise's rotary function.
- JAWS – The Core of any fly tying vise. The jaws are made of a fine, hardened steel with anti-corrosive properties. The jaw is adjustable to accommodate a wide range of hooks size 28 - 2/0
- Arms, bearing housing, handle, shaft and plate are made of hard anodized marine grade Aluminum.
- The brand Kingfisher Fly Fishing is owned by The Kingfisher Fly Shop, based in Missoula, Montana.
- We are an American, brick and mortar store founded in 1997 by two fishing guides. The same two fishing guides run the company today.
- True rotary fly tying vise with two ball bearing housing, extreme smooth and balanced.
- Hardened tool steel jaws fitting 26 to 4/0 hook sizes.
- Arms, bearing housing, handle, shaft and plate are made of hard anodized marine grade Aluminum.
- Comes with a complete Fly Tying tool kit
- The brand Kingfisher Fly Fishing is owned by The Kingfisher Fly Shop, based in Missoula, Montana.Â
- 100% RUST-FREE CONSTRUCTION. Dr.Fish Rotary Vise is constructed with Stainless Steel Stem, CNC Aluminum Arm, 40Cr Jaws, and Aluminum C Clamp. Every component is manufactured aiming to withstand 10 years of frequently tying.
- FULL 360-DEGREE ROTATION. Ball Bearings are loaded to both end of main shaft to provide smooth 360 ° rotation. The long handle enables quick, easy and precise angle adjustment. Front and rear big-knob screw design makes it easy to adjust and provides better tightness.
- STRONG HOOK HOLDING POWER. Adopted heat treatment technology on wider and deeper profile, which greatly improves the hardness and stability, these Jaws hold hooks sized from 28 to 10/0 like a rock, making one vise for all types of flies tying possible.
- Optional Base Available. Featuring extra-long T-shaped screw, the vise can be clamped on the desktop effortlessly. C-clamp opening distance is 5.5cm/ 2.17in for compatible with all desks and tables. Hex nut design delivers easily change of the vise angle at any time, and it can be easily disassembled to replace the base. Vise’s offer with a 5 x 8” pedestal base is now available, makes it an ideal travel kit.
- FOR BEGINNER AND EXPERIENCED. Rotary vise designed for optimal tying efficiency and ease of adjustment. Even the slightest discomfort detected from the test was revised, allows you to maneuver the fly without taking it out of the vise, making it easier and taking less time to tie your flies.
- Hardened tool steel jaws with CAM operation. 26 to 4/0 hook sizes. True rotary design with tension adjustment makes it our most convenient fly tying vice to date.
- User instruction: 1. Move the lever down to loosen the jaw to hold the hook. Then press the lever up to tighten the jaw until the hook is properly clamped. 2. If the jaw opening is too small or large for the hook, please adjust the front opening screw to get the jaw proper open size fitting the hook. 3. Adjust the jam nut to the desired amount of resistance when you perform the rotation.
- Go with a C-clamp base, suit for any table thickness.
- Lifetime Guarantee and 100% made in the USA
- Jaw capacity is 28 to 4/0
- The Odyssey Fly Tying vise is a true 360 degree rotating vise that come with a c-clamp and bobbin cradle.
- An entry level Fly Tying Vise at an entry level price
- Made from the finest materials and made to last a lifetime
- Riverruns II Generation fly tying vise is a true extendable rotary action fly tying vise on the market! Any hook hold by the jaws is able to stay at the exact same center point during rotation! Calculated CNC cut away in the bar stock of jaws to achieve the best balance of the vise and the smoothest rotation. The tension of the rotation is fully adjustable from rock solid to almost friction-less.
- Jaws set is truly extendable in both horizontal and vertical dimension to accommodating any large flies needed to work on. All vise are equipped both right and left hand operation jaw set components. The jaws clamming system exerts a force of 10:1 ratio on the hook, a rock solid holding. The Jaws of the vise are easy to open and close.
- They are also easily adjustable for hook sizes from #28 to #7/0. Once set, the jaws will remain in the set position for as many flies of that size that you wish to tie. They won’t need calibration unless manually reset by the user. II generation rotary fly tying vise not fit for pedestal base measures:5.6*4*0.6 inch/14*10*1.5cm. Weight:19.12oz/542g.
- The bobbin cradle is very handy and versatile. It can be used as a parachute tool. Simply turn over the unit on the vise stem and then tighten the nut/bolts while in the lower position, then raise the arm to high position needed. Package includes vise, bobbin cradle and table clamp. The clamp comes with protective pads that eliminate any marks or damage to the mounting surface.
- Aventik quality fly tying vise, made of hard andoziezd aluminum body and hard chromium carbon steel jaw materials can for a long time use. It is light weight only 9.63OZ (273g), compact and easy for travel.
- This is a extremely durable and simple single lever action rotary fly tying travel vise to minimize weight whilst retaining tensile strength and durability, with hardened and tempered steel jaws. The vise is accompanied by a sturdy C-clamp to help anchor it in place. The in-line head assembly rotate 360 degrees, this allows the tier to view the fly from all angles, to finish fly tying without removing the hook. By rotating the screw, height of the vise can be adjusted.
- The hard chromium carbon steel jaw accommodate size #22 to #3/0 fly hooks. Please note that this is an approximation as the gauge of the wire used to manufacture fly hooks do vary from brand to brand. We cancelled extra midge jaw program after first butch testing, it is not necessary. Since this Standard jaw has all the functions.
- Length: 8.6 inch (21.5cm). Color: silver + black color. The vise is ideal for a beginner wishing to upgrade to a rotary vise or an experienced fly tier looking for an inexpensive vise or lightweight travelling vise for that trip away.
- Free Aventik Fly Tying Vise Racks in two popular colors, Grey and Black. Made of Styrofoam 15PA, high density with hook rust inhibition, 16 slits each for holding hooks and flies securely. Size 2.5 Inch 6.5 cm dia, can slide over and fix on any vise stem. A stainless steel spring included for adding on the vise for holding any fly tying thread or feathers.
- The Peak Rotary Vise is designed for optimal tying efficiency and ease of adjustment. Materials (including Stainless Steel, Brass, Tool Steel, and Aircraft Aluminum) are chosen to last a lifetime.
- Hardened and tempered tool steel jaws hold hooks securely, from size 2/0 (depending on exact hook wire diameter) down to the smallest on the market.
- The large stable pedestal base will hold this vise where you set it and the non-marking feet will protect the surface you set it on.
- The steel base is powder coated white for a durable surface that provides a backdrop you can see your materials against.
- The base also includes an integrated hook/bead pocket with rounded edges for ease of removal and two accessory post mounting holes (accessory post not included).
- Holds #28 to 4/0
- Easy to adjust locking cam jaws
- Anodizing on all aluminum parts for durability
- 7″ stem
- Made in the USA
- The Black color Crown Vise is a top-quality professional fly-tier vise. With Free Hook Remover Value 12.99$
- Accommodates hooks from size 4/0 down to 22 or smaller.
- The jaws open by lever action for quick and easy hook changes and hold the hook securely.
- Elegant black finish with a Heavy base to tie flies anywhere.
- The angle of the jaws may be adjusted up and down or 360 degrees to suit your needs
- True 360 degree rotation
- Adjustable rotary tension
- Adjustable, hide away material clip
- Fully adjustable bobbin cradle. Specify right- or left-handed version
- Painted adjustable hardened steel jaw hinge to accommodate the full spectrum of hooks from size 28 to 5/0 hooks
- 360° ROTATION - The Colorado Anglers 102 Supreme, Rotary Fly Tying Vise enables 360 degree rotation whilst hooks are clamped for a better fishing experience
- MULTIPLE ADJUSTMENTS - This fly fishing vise is both practical and multifunctional, providing multiple adjustments for teasers and jigs
- RESILIENT DESIGN - This fly vise’s resilient design can hold a heavy gauge hook well enough to flair out bucktail and it comes with a cast iron clamp
- HOOK FUNCTIONALITY - Although designed for small hooks, it can accommodate most hook sizes, as well as saltwater hooks and it provides access to rear of hook
- FOR MULTIPLE JIGS - The vise can be used for a range of jigs, including 24oz jigs, 8oz bottom jigs, bucktail jigs, crapple jigs and more
- 360 true rotation
- Size 4/0 to 28
- C-Clamp & Pedestal Included
- Hackle Gauge Included
- Lifetime warranty
- This is a true rotary vise with hardened tool steel jaws. 26 to 4/0 hook sizes. True rotary design allows the axis of rotation to be in line with the shaft of the hook. Adjustable rotary tension for precise control. With the design of two bearings, it is more stable and smooth.
- Adjust the first nut to get the desired amount of resistance when you perform the rotation, adjust the second nut to secure.
- User instruction: 1. Move the lever down to loosen the jaw to hold the hook. Then press the lever up to tighten the jaw until the hook is properly clamped.
- 2. If the jaw opening is too small or large for the hook, please adjust the front opening screw to get the jaw proper open size fitting the hook.
- Go with a sturdy C-clamp base, suit for any table thickness.
- 🐠【Neccessory tools for fly fishing】Including fly tying vise, bobbin threader, bobbin needle and holder , scissors, etc. commonly used in fly fishing, it is a perfect gift for fly fishing beginners.
- 🐠【Fly tying vise with max jaw opening】1mm,the jaw can hold hooks securely,The clamp fits for desk thickness: max. 43mm.
- 🐠【Efficient and convenient】Bobbin threader makes it easy to get even the smallest thread through your bobbin,eliminate your frustrations of trying to thread your bobbin by hand; Bobbin holder securely holds a spool(not included) of thread under tension when tying flies,save yourself time and easy to operate.
- 🐠【Knotting with ease】Bobbin needle help to knot,finish gluing and clear excess material; Whip finisher speeds through knots,tying off files easily and quickly.
- 🐠【Portable kits】The fly fishing tool set is lightweight, takes up little space, and is easy to carry.
- 360°Rotation: SF fly tying vise rotates 360°around a single axis point, the crank handle achieves a firm grip when using its rotation.
- Jaws: The jaws are made of anti-corrosive hardened steel, it is used by many fly tiers to handle hooks from 28 to 4/0.
- Material: The arms, bearing housing, handle, shaft and the base are made of aluminum.
- The bottom of the fly tying vise base features high friction foam pad, making the base very stable, which ensures steady and precise fly tying. Elevate your fly fishing experience with this reliable and durable fly tying vise.
- Designed for fly fishermen, it is a must-have tool in your fishing gear arsenal.
This guide is designed to help normal folks like you and me easily spot the good stuff from the not-so-good stuff. We’ll show you exactly what to look for so you can spend your hard-earned money on fly tying vises that are truly worth it.
What exactly are a fly tying vises?
The fly tying vises are specialized products used by enthusiasts of the hobby or activity. They come in various shapes, sizes and levels of quality.
Pretty neat, right? But not all fly tying vises are created equal. The cheap ones might look okay at first glance, but they’re made with low-quality materials and poor construction. That means they’ll start falling apart and wearing out before you know it. What a waste of money!
The Difference Between Cheap and Quality fly tying vises
The really good fly tying vises are made very differently. They use high-quality parts and are put together with a lot of skill and care. These premium products are:
So while quality fly tying vises might cost more upfront, you actually save money in the long run because you don’t have to keep replacing cheap junk. Not to mention you get way more enjoyment out of using a well-made product that works like a dream.
How to Identify a Truly Well-Made fly tying vises
How can you tell if the fly tying vises are really well-made though? Here are some key things to watch for:
Materials
The best fly tying vises use top-notch materials like aircraft-grade aluminum, stainless steel, genuine leather and so on.
Anything less is a sign that it’s a cheaply-made product that will fall apart fast.
Features & Design
Well-crafted fly tying vises have smart designs with useful features like enhanced ergonomics, increased durability, innovative functionality and more.
This is what separates the real high-performance products from basic bargain-bin models.
Construction Quality
Solid, well-built fly tying vises should show close attention to detail, such as reinforced stress points, precision engineering, and flawless finishes.
You can just tell when something was slapped together quickly versus made with skill and care.
Brand Reputation
Stick to buying from brands with a proven history of making quality fly tying vises that last. Always check reviews and ask other fly tying vises users about what brands they recommend and trust.
No Fakes!
There are lots of counterfeit and knockoff fly tying vises out there that look legit at first glance. Always buy from official brand stores or authorized sellers to ensure you’re getting the real 100% authentic.
Factors to Consider When Choosing the Right fly tying vises
Intended Use
Think about how you plan to use the fly tying vises. If it’s for casual, infrequent use, you may be able to go with a less expensive option. But for regular, heavy-duty use, you’ll want to invest in the highest quality gear.
Skill Level
Are you a beginner or seasoned pro at this hobby? Advanced users may need more specialized with enhanced features, while beginners can start with more basic equipment.
Item Lifespan
How long do you intend to use this item? If it’s just a short-term thing, a cheaper option could suffice. But if you want decades of use, go for the premium fly tying vises built to last generations.
Additional Costs
Don’t just look at the upfront price tag. Factor in any extra costs for accessories, repairs, maintenance, replacements parts, etc. over the life of the fly tying vises.
Narrowing Down Your fly tying vises Options
With so many fly tying vises products on the market, it can be overwhelming to pick the right one. Here are some tips to help narrow your options:
Having a focused list of strong contenders makes the final decision so much easier.
Picking the Perfect fly tying vises for Your Needs
So how do you ultimately choose the right product for your needs? Here are some easy tips:
Write down the exact features and specs you need before shopping around. That way you won’t get distracted by fancy bells and whistles you don’t actually want or need.
Don’t go rock bottom on price no matter how tempting it is – that’s how you end up with junk. But also be realistic about what you can afford to spend. Quality ain’t cheap!
Read reviews from regular consumers and enthusiasts. Watch video demos. Learn everything you can about different product models before buying so you can make an informed choice.
How long have they been around? Where do they manufacture? What do other fly tying vises users say about their products? This context clues you into their level of quality and credibility.
While the upfront sticker price will be higher, that premium fly tying vises could actually cost you less over its super-long lifetime of use compared to replacing multiple cheaper products.
At the end of the day, you know quality when you see and feel it. If something seems off about a particular item, there’s probably a good reason. Go with the option that feels 100% right to you.
Tips for Inspecting fly tying vises In-Person
While you can learn a lot from research, there’s no substitute for seeing and handling fly tying vises yourself before purchasing. Here’s what to look for:
Reputable brands will have robust warranties and return policies too, so be sure to understand those terms.
Extended Warranties – Worth It or Not?
You’ll often be offered an extended warranty when buying higher-end fly tying vises. Is it worth paying extra for added coverage?
It depends on a few factors:
If you’ll be using the fly tying vises frequently for years in tough conditions, and the warranty is reasonably priced, it could provide valuable protection. But for casual, careful use, you may be able to skip it.
Getting the Best Deal on Quality fly tying vises Gear
Even once you’ve identified the perfect fly tying vises, there are still ways to pay less than full retail price:
Stacking a few of those money-saving tactics can lead to seriously low prices on top-shelf fly tying vises gear!
Building Your fly tying vises Collection Over Time
For some hobbies, outfitting yourself with all the equipment you need can be an expensive proposition, even after finding good deals. One strategy is to build your collection gradually over time.
Start with the most essential, versatile items first. Then add specialized pieces as your skills progress and your budget allows. Having the proper core items is better than a bunch of niche accessories and toys.
You can also plan to upgrade key items every few years as your enthusiasm and commitment levels increase. That heirloom-quality product you can’t afford today could be well within reach in a couple years’ time.
fly tying vises Communities and Resources
Don’t go in alone on your quest for the best products in your hobby! There are tons of communities, clubs and online resources full of fellow enthusiasts.
Tap into their collective knowledge and experience to get advice, see item reviews, scout for deals and discounts, learn maintenance tips, and generally level up your hobby.
In-person meetings are great for hands-on lessons, trying out new products, and bonding over your shared passion. Online forums and social media groups allow you to connect with people that share the same interests.
Key Takeaways for Buying the Best fly tying vises
There’s a huge difference between true high-quality fly tying vises built to last and those flimsy bargain-basement cheapos. If you want to get your money’s worth and enjoy your hobby for years to come, you gotta do your research and buy smart. This guide gives you all the insider tips to make that happen.
Once you have that sweet new fly tying vises home, the fun is just getting started! Proper cleaning and maintenance will keep it in tip-top shape for the long haul. Join some communities online or in-person to learn all the tricks. You’ll get to bond with fellow enthusiasts too.
The bottom line? Buying quality fly tying vises might require a bigger upfront investment. But you’re getting an item crafted with care and built to bring you decades of satisfaction. It’s absolutely worth it if you’re serious about your hobby. So quit messing around with trash and treat yourself to the good stuff already!